Weight: 7oz (196g)
Max Efficiency: 82%
Max efficiency: 38A
Max Load: 43A
Motor Diameter: Approx. 42mm
Shaft diameter: 5 mm
Equivalent to E-Flite Power 32 / AXI 2826
- 60A Opto brushless motor ESC
- 3-4S LiPO and at least 3300-4000mAh.
- Prop Selection: Remember to always use props designed for electric motors, nitro props are heavier and might overload the motor.
14x7 with 3S LiPO or 13 x 8 with 4S LiPO
- The above prop selections are recommended for sports flying at open throttle. You may use slightly larger props if you do not fly at constant open throttle.
This motor includes prop adapter and radial mount shown below. The motor has bullet connectors pre-installed, and includes female bullet connectors for use with your ESC.
The included accessories allow you to mount the motor in front of the firewall. Shown below is the motor with radial mount installed on the back and prop adapter installed on the front, ready to be installed in front of the firewall.
If you would like to mount it behind the firewall, you will need to purchase the 5mm Collet Adapter.